Doc Library

This technical data publication covers specifications for the full 1769 Compact I/O module family, including digital, contact, analog, and specialty I/O modules. It provides environmental ratings, certifications, wiring diagrams, and per-module electrical specifications for catalog numbers such as 1769-IA8I, 1769-IQ32, 1769-OB16, 1769-IF8, 1769-OF4, 1769-HSC, and many others. The modules are compatible with CompactLogix controllers, MicroLogix 1500, the 1769-ADN DeviceNet adapter, and the 1769-AENTR Ethernet adapter. Modules mount on DIN rail or panel and connect via a tongue-and-groove assembly with an integrated communication bus.

This user manual covers the Allen-Bradley ControlLogix 5570 and 5560 controller families, catalog numbers 1756-L61 through 1756-L75, including extreme environment and Armor ControlLogix variants. It provides installation, configuration, communication setup, and troubleshooting procedures for both controller families. Topics include firmware upgrades, memory card operations, I/O configuration, motion application development, and the PhaseManager tool. The manual is intended for application engineers, control engineers, and instrumentation technicians familiar with Logix 5000 control systems.

This reference manual covers safety application development for GuardLogix 5570 and Compact GuardLogix 5370 controllers, catalog numbers 1756-L71S through 1756-L73EROMS and 1769-L30ERMS through 1769-L38ERMSK. It describes SIL 3 certification per IEC 61508, CIP Safety protocol, safety task configuration, safety tags, PFD and PFH specifications, and the commissioning lifecycle. The manual is intended for engineers responsible for developing, operating, or maintaining GuardLogix-based safety systems using Studio 5000 Logix Designer.

This user manual covers the Allen-Bradley POINT I/O 1734 series digital and analog modules and POINTBlock I/O modules. It describes how to configure, calibrate, and troubleshoot digital DC and AC input/output modules, relay output modules, and analog current and voltage modules. Configuration procedures use Studio 5000 Logix Designer for ControlNet and EtherNet/IP networks and RSNetWorx for DeviceNet networks. Default data maps and mounting dimensions for POINT I/O and POINTBlock assemblies are also included.

This selection guide covers the Allen-Bradley POINT I/O modular I/O system, Bulletin 1734. It documents communication adapter options for EtherNet/IP, ControlNet, DeviceNet, and PROFIBUS DP networks, along with specifications for digital, analog, POINT Guard safety, and specialty I/O modules. The guide also covers terminal bases, expansion power supplies, accessories, and mounting requirements to help engineers configure a complete POINT I/O system.

This technical data sheet provides specifications for CompactLogix 5380, Compact GuardLogix 5380, and CompactLogix 5480 controllers in the Logix 5000 family, all under Bulletin 5069. It covers features, technical specifications, environmental ratings, certifications, and accessory information for all catalog variants including SIL 2, SIL 3, conformal coated, and process controller models. Engineers selecting or integrating these controllers with Compact 5000 I/O, EtherNet/IP networks, or Integrated Motion applications will find catalog number breakdowns, I/O capacity limits, and SD card accessory specs in this document.

User manual for the Allen-Bradley PowerFlex 40 (Bulletin 22B) AC drive family — installation, wiring, programming, parameter reference, fault codes, and troubleshooting for the 0.4–11 kW (0.5–15 HP) drive lineup. Covers all 22B-* catalog numbers including standard, brake, and filtered variants.

Technical data for the Allen-Bradley 1719 FLEX Ex I/O family — distributed I/O modules certified for installation in ATEX / IECEx / cFMus Zone 1 and Division 1 hazardous locations. Covers communication adapters, intrinsically safe digital and analog modules, terminal bases, and EtherNet/IP connectivity.

System-architecture and component selection guide for the Allen-Bradley PlantPAx Distributed Control System (DCS) on ControlLogix 5570 / 5580 / 5590 and CompactLogix 5380 platforms. Walks through every high-level decision that must come before equipment purchase: PlantPAx vs. plain Logix, system-class sizing (Class 1 / 2 / 3 by loop count and plant size), controller selection (standard vs. Process variants, redundant vs. non-redundant), network topology (linear / DLR ring / multi-segment), HMI strategy (FactoryTalk View SE distributed vs. networked), FactoryTalk Historian and AssetCentre integration, batch and recipe management with FactoryTalk Batch, alarm management strategy with FactoryTalk Alarms & Events, security architecture with CIP Security and FactoryTalk Security, and software bundle / licensing summary. Companion to the hands-on instruction references PROCES-RM002 (P_ AOI library), PROCES-RM215 (native process instructions), and PROCES-RM013 (P_ AOI internal logic).

Logic-level companion to the PlantPAx Process Objects Library — documents the internal ladder logic and structured text inside every P_ Add-On Instruction (AOI). Where PROCES-RM002 is the user-facing reference (input/output parameters, faceplate operation, command-source arbitration), PROCES-RM013 is the implementation reference: the actual ladder rungs and ST routines that sit between each AOI’s public interface and the wrapped raw Logix instruction. Audience is engineers who need to audit, troubleshoot, customize, or recreate AOI behavior — for SIL / safety review, site-specific extensions, or migration to a custom framework. Covers the full library: analog I/O AOIs, discrete I/O AOIs, motor and valve AOIs, P_PIDE PID wrapper, dosing and sequencing AOIs, interlocks and permissives, command-source arbitration, alarm framework integration, and the diagnostic / runtime tracking blocks.