Doc Library

This document provides installation instructions for the POINT I/O Wiring Base Assembly, covering catalog numbers 1734-TB and 1734-TBS. It details mounting base and removable terminal block (RTB) installation, wire preparation, and wiring procedures for both screw-clamp and spring-clamp termination types. General, environmental, and certification specifications are included. The publication applies to industrial environments rated Pollution Degree 2 and overvoltage Category II.

This document is the installation instructions for the Allen-Bradley POINT I/O Field Potential Distributor Module, catalog numbers 1734-FPD and 1734-FPDK (Series B). It covers DIN rail installation, module removal and replacement, wiring for 12/24V DC and 120/240V AC field power, and electrical and environmental specifications. The module is used between I/O modules in a POINT I/O system to break and re-source the internal field power bus for modules to its right.

This document is the installation instructions for the Allen-Bradley POINT I/O 1734-EP24DC and 1734-EP24DCK 24V DC expansion power supplies, series B. It covers installation, removal, replacement, wiring, status indicators, and electrical specifications for the expansion power supply. The supply extends backplane bus power for up to 17 I/O modules and provides field power partitioning in a POINT I/O system. Conformal coated catalog numbers carry the suffix K and share identical specifications.

This document is installation instructions for the 1734-AENT and 1734-AENTK POINT I/O EtherNet/IP adapter, series C. It covers DIN rail mounting, thumbwheel configuration for network address and chassis size, wiring, and status indicator interpretation. Specifications for power, Ethernet communication, environmental ratings, and certifications are also included. The adapter provides an EtherNet/IP interface for up to 63 POINT I/O modules.

This document is the installation instructions for the Allen-Bradley POINT I/O output modules, covering catalog numbers 1734-OB2, 1734-OB4, 1734-OB4K, 1734-OB8, and 1734-OB8K, Series C. It covers mounting base installation, module installation, removable terminal block (RTB) wiring, status indicator interpretation, and electrical and environmental specifications. Conformal coated variants (suffix K) share the same specifications as their non-coated counterparts. The Series C modules work with DeviceNet and PROFIBUS adapters. With Studio 5000 Logix Designer version 20 or later they also work with ControlNet and EtherNet/IP adapters.

This document is installation instructions for the Allen-Bradley POINT I/O 1734-EPAC and 1734-EPACK 120/240V AC Expansion Power Supply. It covers component identification, DIN rail installation and removal, terminal block wiring, and electrical and environmental specifications. The supply extends backplane bus power for up to 17 I/O modules and creates a field-voltage partition segment. It is compatible with POINT I/O adapters such as the 1734-ADN, 1734-ADNX, 1734-APB, 1734-ACNR, and 1734-AENT.

This document provides installation instructions for POINT Guard I/O safety modules, catalog numbers 1734-IB8S, 1734-IB8SK, 1734-IE4S, 1734-IE4SK, 1734-OB8S, 1734-OB8SK, 1734-OBV2S, and 1734-OBV2SK. It covers terminal base installation, module insertion, removable terminal block procedures, hazardous location approvals, and key electrical specifications. The modules support safety networks rated up to SIL CL 3 and PLe, Cat. 4 per IEC 61508, IEC 61511, IEC 62061, and ISO 13849-1. Compatible controllers include GuardLogix, Compact GuardLogix, and SmartGuard.

This technical data publication covers Bulletin 1492 wiring systems designed for use with 5069 CompactLogix digital and analog I/O modules. It documents interface modules (IFMs, XIMs, AIFMs), pre-wired cables, analog interface cables, and accessory components including fuse holders, isolation plugs, and removable terminal blocks. Coverage includes module selection tables, catalog number explanations, pinout diagrams, and general wiring system specifications. The document supports AC digital, DC digital, relay, safety, analog, and specialty I/O module types in the 5069 CompactLogix platform.

This technical data publication lists specifications for Allen-Bradley Bulletin 1492 terminal blocks. It covers IEC screw type and spring clamp type terminal blocks, IEC accessories, NEMA terminal blocks and accessories, and power blocks. Data per catalog number includes certifications, voltage and current ratings, wire range, strip length, tightening torque, density, and housing temperature range.

This selection guide covers the 1492 I/O Wiring Conversion System for migrating Allen-Bradley 1771 PLC-5 I/O to 1756 ControlLogix I/O. It provides product selection tables for conversion modules, pre-wired cables, and conversion mounting assemblies for digital inputs, digital outputs, analog inputs and outputs, and 1771-N High Resolution Isolated Analog I/O modules. Wiring diagrams for each conversion path are included along with chassis dimension data and module specifications. Engineers planning a PLC-5 to ControlLogix migration use this guide to select compatible catalog numbers without removing existing field wiring from swing arms.