Doc Library

Complete technical data for the Allen-Bradley PointMax I/O system (Bulletin 5034). Covers the EtherNet/IP adapter, mounting bases, digital and analog I/O modules, safety I/O, specialty I/O (IO-Link, RTD, encoder, serial), expansion power, power terminal modules, and removable terminal blocks. PointMax I/O is Rockwell’s next-generation distributed I/O system built around EtherNet/IP with Producer/Consumer multicast, supporting up to 32 I/O modules per adapter and intermix of standard, safety, and XT modules on the same backplane.

This user manual covers the PowerFlex 520-series adjustable frequency AC drives, including the PowerFlex 523 (bulletin 25A) and PowerFlex 525 (bulletin 25B). It provides installation, wiring, startup, programming, and troubleshooting information for qualified personnel. Topics include power and control wiring, parameter groups, RS-485 (DSI)/Modbus, EtherNet/IP, Safe Torque Off, PID setup, encoder/pulse train usage, and PM and synchronous reluctance motor configuration.

This technical data sheet covers specifications for the Allen-Bradley PowerFlex 527 AC drive, Bulletin 25C. It details electrical, control, environmental, and safety specifications for drives rated up to 30 HP (22 kW) across 100…600V input voltage ranges and five frame sizes (A through E). The document also includes catalog number explanations, product selection tables, fuse and circuit breaker ratings, drive dimensions, and Safe Torque Off function data. It is intended for engineers selecting or applying the PowerFlex 527 with Allen-Bradley Logix controllers and Studio 5000 Logix Designer software.

This document is the installation instructions for the Bulletin 160 to PowerFlex 520-Series Adapter Plate, catalog numbers 25-MAP-FA and 25-MAP-FB. It covers mechanical assembly, drive installation, wiring of the adapter plate to the Power Module, and terminal block torque and wire size specifications. Series B design adds two wires for dynamic brake resistor connection (BR+, BR-). The instructions apply to Frame A and Frame B adapter plate variants.

This user manual covers the Compact 5000 EtherNet/IP adapters, catalog numbers 5069-AENTR, 5069-AENTRK, and 5069-AEN2TR, for use in Logix 5000 control systems. It describes adapter features, power requirements, IP address configuration, and EtherNet/IP network connection procedures. Compatible controllers include CompactLogix 5380, Compact GuardLogix 5380, CompactLogix 5480, ControlLogix 5580, and GuardLogix 5580. Studio 5000 Logix Designer application version 28.00.00 or later is required.

This user manual covers the Compact 5000 analog I/O modules for use in Logix 5000 control systems. It describes module operation, configuration, calibration, HART communication, and troubleshooting for catalog numbers 5069-IF4IH, 5069-IF8, 5069-IY4, 5069-IY4K, 5069-OF4, 5069-OF4K, 5069-OF4IH, and 5069-OF8. The manual addresses both local and remote I/O configurations using EtherNet/IP. It is intended for engineers and technicians using Studio 5000 Logix Designer with CompactLogix, CompactLogix 5480, Compact GuardLogix 5380, ControlLogix 5580, or GuardLogix 5580 controllers.

This user manual covers Compact 5000 digital I/O modules used in Logix 5000 control systems. It describes module operation, configuration, wiring, and troubleshooting for both standard and safety digital I/O modules. The manual applies to 19 catalog numbers including AC, DC, relay, fast, and safety variants. Configuration is performed using the Studio 5000 Logix Designer application, version 28 or later for standard modules and version 32 or later for safety modules.

This user manual covers the Allen-Bradley Compact 5000 I/O Serial Module, catalog number 5069-SERIAL, for use in Logix 5000 control systems. It describes module operation, configuration in Studio 5000 Logix Designer, and supported serial protocols including Generic ASCII, Modbus RTU/ASCII Master/Slave, DF1, and DH-485. The module provides two independent isolated serial channels supporting RS-232C, RS-422, and RS-485 interfaces. Compatible controllers include CompactLogix 5380, Compact GuardLogix 5380, CompactLogix 5480, ControlLogix 5580, and GuardLogix 5580.

This product cut sheet covers the 5069 Removable Terminal Blocks (RTBs) for the Compact 5000 platform. It documents specifications for spring-clamp and screw-type RTBs used to wire power to 5069 controllers or I/O connections to 5069 I/O modules. Eight catalog numbers are covered, including 4-position, 6-position, 18-position, and 14-position CJC variants in both termination styles.

This document provides installation instructions for the Compact 5000 analog current/voltage output modules, catalog numbers 5069-OF4, 5069-OF4K, and 5069-OF8. It covers DIN rail and RTB installation, wiring diagrams for current and voltage modes, and module removal procedures. The modules convert digital values to analog signals using non-isolated output channels that support current and voltage ranges. They operate as local or remote I/O with CompactLogix 5380, Compact GuardLogix 5380, and CompactLogix 5480 controllers.