Operating Instructions · Publication A5E36770603 · Siemens AG
SIMATIC HMI Comfort Panels Operating Instructions
This operating instructions manual covers the SIMATIC HMI Comfort Panels product line, published by Siemens AG in July 2022. It addresses mounting, connecting, commissioning, operation, maintenance, and technical specifications for twelve panel models ranging from 4-inch to 22-inch display sizes. The manual applies to key panels, touch panels, and the combined Key and Touch panel variant, all configured using WinCC software within the TIA Portal framework. It is intended for users, commissioning engineers, and maintenance personnel.
Download PDFDocument Preview
Open the full PDF in a new tab · Publication A5E36770603
Specifications
Display and Enclosure
| Display type | High-resolution TFT widescreen with 16 million colors, wide viewing angle, completely dimmable |
|---|---|
| 4" model enclosure | Plastic enclosure |
| 7" and larger enclosure | Aluminum pressure enclosure |
| Mounting formats | Landscape and portrait (portrait for touch models only) |
Interfaces
| PROFINET (4" models) | 1 x PROFINET interface (X1), 10/100 Mb |
|---|---|
| PROFINET (7", 9", 12" models) | 1 x PROFINET interface (X1), 10/100 Mb |
| PROFINET (15", 19", 22" models) | X1: 10/100 Mb; X3: 10/100/1000 Mb (gigabit) |
| PROFIBUS | 1 x PROFIBUS DP interface (X2), Sub-D RS422/485 |
| USB host (Type A) | 1 x X61 on 4" models; 2 x X61/X62 on 7" and larger models |
| USB device (Type Mini-B) | 1 x on Comfort V1/V1.1 devices (X60) |
| Audio | X90 Audio Line OUT (not available on KP400 Comfort and KTP400 Comfort) |
| Power supply connector | X80, 24 V DC |
Mounting and Installation
| Permitted mounting cutout material thickness | 2 mm to 6 mm for IP65 or Front face only Type 4X/Type 12 (indoor use only) |
|---|---|
| Permissible deviation from plane at mounting cutout | ≤ 0.5 mm |
| Permissible surface roughness at seal area | ≤ 120 µm (Rz 120) |
| Approved inclination from vertical | Up to +/-35° (self-ventilated) |
| Extended range, 7" to 15" devices | Vertical landscape up to +55 °C, or landscape at up to 40° inclination up to 40 °C, when USB load is 100 mA max. per port, the +24 V DC PROFIBUS connection is unused, and humidity conforms to the climate diagram |
| Clearance above and below mounting cutout | At least 50 mm |
| Clearance left and right of mounting cutout | At least 15 mm |
| Clearance behind rear panel | At least 10 mm |
| Mounting screw torque (4" model) | 0.2 Nm |
| Mounting screw torque (7" to 22" models) | 0.5 Nm |
| Power supply cable max cross-section | 1.5 mm² |
| Power supply connector screw torque | 0.5 to 0.6 Nm |
Memory
| Internal memory contents | Operating system, project file, license keys, user administration, recipes, other data |
|---|---|
| Memory card slots | 2 slots: one for user data (SD IO/HC or MMC format), one for system memory card |
| System memory card requirement | SIMATIC HMI Memory Card ≥ 2 GB only |
| Data log storage frequency | Approximately 0.2 Hz |
Device Variants by Version
| Comfort V1 features | Display sizes 4"...22", audio double socket, USB Mini-B socket, Windows CE 6 |
|---|---|
| Comfort V1.1 features | Display sizes 7"...12", audio OUT, USB Mini-B socket, Windows CE 6 |
| Comfort V2 features | Display sizes 15"...22", audio OUT, no USB Mini-B socket, Windows Embedded Compact 2013 |
EMC Standards
| Interference emission | EN 61000-6-4:2019 |
|---|---|
| Immunity | EN 61000-6-2:2019 |
Communication Protocols
Supported industrial networks and field buses for the products covered by this publication.
PROFINET Devices with 7\" or larger displays have an internal switch, so a ring topology can be set up without an external switch (use X1 on 15\" and larger). 15\" and larger models add a gigabit PROFINET interface (X3, 10/100/1000 Mb).
PROFIBUS DP Sub-D RS422/485 interface (X2) present on all Comfort Panel models.
TCP/IP / Ethernet PROFINET (LAN) interface used for configuration PC connection, project transfer, Sm@rtServer remote access, and Web Server functionality.
Certifications & Compliance
Possible approvals listed in section 8.2; the device itself is approved as shown on its rear panel labels
CE: EMC Directive 2014/30/EU, Explosion protection Directive 2014/34/EU, RoHS Directive 2011/65/EU
UKCA marking
UL approval (E116536 or E222109): 7 to 12 in devices to UL 61010-1 / UL 61010-2-201; all other devices to UL 508; Class I, Division 2, Group A, B, C, D T4 or Class I, Zone 2, Group IIC T4
FM Approval: Class I, Division 2, Group A, B, C, D T4; Class I, Zone 2, Group IIC T4
ATEX/UKEX/IECEx approval for devices with Ex marking (II 3 G Ex ec IIC T4 Gc; II 3 D Ex tc IIIC T70 °C Dc)
IEC 61010-2-201 and/or IEC 61131-2
RCM Australia/New Zealand, KC (Korea), EAC
Marine approvals: ABS, BV, DNV, LRS, RINA, Class NK, KR, CCS
Document Contents
Full PDF covers the following topics in detail:
- Preface: purpose, scope, basic knowledge required, naming conventions
- Chapter 1: Overview: product description, scope of delivery, device design, interfaces, accessories, software add-ons
- Chapter 2: Safety instructions: general safety, security management, data protection, usage notes, hazardous area use
- Chapter 3: Mounting and connecting the device: installation location, mounting cutout, mounting clips, wiring, power supply, controller connection, USB and printer connection
- Chapter 4: Commissioning the device: firmware and software, memory concept, memory card management, Control Panel parameterization, network and transfer settings, UPS
- Chapter 5: Commissioning a project: operating modes, data transfer, backup and restore, OS update, add-on and license key management
- Chapter 6: Operating a project: function keys, direct keys, value input, infotext, language setting
- Chapter 7: Maintenance and care: cleaning, spare parts, recycling
- Chapter 8: Technical information: certifications, EMC, mechanical and climatic conditions, dimension drawings, technical specifications, interface descriptions, controller communication, WinCC scope of functions
- Appendix A: Technical Support: troubleshooting, system alarms, manufacturer information
- Appendix B: Markings and symbols
- Appendix C: Abbreviations and Glossary
Frequently Asked Questions
Which HMI device models does this manual cover?
The manual covers twelve SIMATIC HMI Comfort Panel models: KP400 Comfort (6AV2124-1DC01-0AX0), KTP400 Comfort (6AV2124-2DC01-0AX0), KP700 Comfort (6AV2124-1GC01-0AX0), TP700 Comfort (6AV2124-0GC01-0AX0), KP900 Comfort (6AV2124-1JC01-0AX0), TP900 Comfort (6AV2124-0JC01-0AX0), KP1200 Comfort (6AV2124-1MC01-0AX0), TP1200 Comfort (6AV2124-0MC01-0AX0), KP1500 Comfort, TP1500 Comfort, TP1900 Comfort, and TP2200 Comfort. Display sizes range from 4 inches to 22 inches.
What software is required to configure the Comfort Panels?
All Comfort Panel models are configured using WinCC software integrated into the Totally Integrated Automation (TIA) Portal. Devices are configurable as of WinCC V11; the manual description relates to V14 or higher.
What PROFINET interfaces are available and what are their speeds?
The 4-inch models have one PROFINET interface (X1) at 10/100 Mb. The 7\", 9\", and 12\" models also have one PROFINET interface (X1) at 10/100 Mb. Devices with 15\" displays or larger have two PROFINET interfaces: X1 at 10/100 Mb and an additional gigabit X3 interface at 10/100/1000 Mb.
What are the memory card requirements for the system memory card slot?
Only a SIMATIC HMI Memory Card with a capacity of 2 GB or greater may be used as the system memory card. All other memory cards are not recognized as a system memory card by the HMI device. The standard memory card slot accepts commercially available SD (IO/HC) or MMC format cards, though Siemens recommends the SIMATIC HMI Memory Card for data consistency.
What are the permitted mounting positions and temperature limits for the Comfort Panels?
All HMI devices support landscape mounting. Touch models also support portrait mounting. The device is self-ventilated and approved for inclined mounting at angles up to +/-35° from the vertical. For 7\" to 15\" devices, vertical landscape mounting at up to +55 °C and inclination up to 40° from vertical at up to 40 °C are permitted when USB load does not exceed 100 mA per port and the 24 V DC PROFIBUS interface connection is not used.
What uninterruptible power supply (UPS) devices are supported?
The HMI devices support SITOP DC UPS modules as of a rated power value of 6 A, connected to the USB port of the HMI device. On a power failure the HMI device is shut down in a controlled manner after a buffer time. The UPS add-on must be transferred as an option; no license key is required.
What software add-ons are available for the Comfort Panels?
Available add-ons include WinCC /Sm@rtServer (remote HMI access and Web Server), WinCC /Audit (audit trail and electronic signature), WinCC /ProDiag (plant and machine monitoring), UPS with USB support, PDF Viewer, Word Viewer, Excel Viewer, Media Player, Internet Explorer, and a printer driver for PostScript, HTML, and PDF output. Pre-installed add-ons (PDF Viewer, Word Viewer, Excel Viewer, Media Player, Internet Explorer) require no license key.
Disclaimer
Disclaimer: PLC Exchange is an independent reseller and is not an authorized distributor, affiliate, licensee, partner, or agent of Siemens. All product information on this page is compiled from publicly-available manufacturer publications, technical data sheets, and catalog sources, each of which remains the copyright of its originating manufacturer. We make no representation or warranty, express or implied, regarding the accuracy, completeness, timeliness, or fitness for any particular purpose of the specifications or descriptions shown — content may contain errors, omissions, or out-of-date information. Product images are the property of their respective manufacturers, trademark owners, and source publications, and are displayed solely for identification purposes under the nominative fair use doctrine; images are representative and may depict a different configuration or catalog variant than the exact product listed. Purchasers should independently verify specifications against the current manufacturer publication before placing an order. All product names, trademarks, service marks, and registered trademarks are the property of their respective owners, and their use does not imply endorsement or affiliation.