Installation Instructions · Publication 5069-IN011 · Rockwell Automation

5069-IY4 / IY4K Analog 4-Channel Input Module Install Guide

This publication provides installation instructions for the Compact 5000 analog 4-channel universal input modules, catalog numbers 5069-IY4 and 5069-IY4K. It covers mounting on DIN rail, RTB installation and wiring, end cap installation, and module removal. The modules support current, voltage, RTD, and thermocouple inputs and operate in CompactLogix 5380, Compact GuardLogix 5380, and CompactLogix 5480 controller systems as local or remote I/O.

Download PDF
4 Input Channels
0…60 Operating Temp
+/-10V DC, 0…20 mA, 0…… Analog Input Rating
75 mA @ 18…32V DC MOD Power Draw

Document Preview

Open the full PDF in a new tab  · Publication 5069-IN011

Specifications

Electrical Ratings

Analog input ratings +/–10V DC, 0…20 mA, 0…4 kΩ per channel
MOD power 75 mA @ 18…32V DC
MOD power (passthrough) 9.55 A @ 18…32V DC
SA power 100 mA @ 18…32V DC
SA power (passthrough) 9.95 A @ 18…32V DC
Maximum MOD or SA power passthrough Do not exceed 10 A

Isolation Voltage

Continuous isolation 250V (continuous), Basic Insulation Type
SA power to input ports 50V Functional Isolation
Between individual input ports No isolation

Temperature

Operating temperature 0…60 °C (32…140 °F)
Surrounding air temperature, max 60 °C (140 °F)
North American temp code T4
UKEX/ATEX temp code T4
IECEx temp code T4

Wire Specifications

Wire size (screw RTB) 0.5…1.5 mm² (22…16 AWG) solid or stranded shielded copper, rated 105 °C (221 °F) or greater, 3.5 mm (0.14 in.) max diameter including insulation
Wire size (spring RTB) 0.5…1.5 mm² (22…16 AWG) solid or stranded shielded copper, rated 105 °C (221 °F) or greater, 2.9 mm (0.11 in.) max diameter including insulation
Insulation-stripping length (screw) 12 mm (0.47 in.)
Insulation-stripping length (spring) 10 mm (0.39 in.)
RTB screw torque 0.4 N•m (3.5 lb•in)

Physical

Enclosure type rating None (open-style)
DIN rail EN50022 – 35 x 7.5 mm (1.38 x 0.30 in.)
Module width 25.56 mm (1.01 in.)
Module height 144.57 mm (5.69 in.)
Module depth 109.09 mm (4.29 in.)
Altitude Up to 2000 m (6562 ft) without derating
Pollution degree Pollution Degree 2
Overvoltage category Category II (EN/IEC 60664-1)

Communication Protocols

Supported industrial networks and field buses for the products covered by this publication.

EtherNet/IP Uses Producer/Consumer communication model; modules produce data without first being polled

Certifications & Compliance

Class I, Division 2, Groups A, B, C, D (North American Hazardous Location) UKEX: Ex ec IIC T4 Gc — DEMKO15ATEX 1484X, UL22UKEX2379X; Zone 2 per UKEX Regulation 2016 No. 1107 ATEX: Ex ec IIC T4 Gc — DEMKO15ATEX 1484X; Zone 2 per ATEX Directive 2014/34/EU IECEx: Ex ec IIC T4 Gc — IECExUL15.0055X; Zone 2 per IEC 60079-0 and IEC 60079-7 EN IEC 60079-0:2018 and CENELEC EN IEC 60079-7:2015+A1:2018

Document Contents

Full PDF covers the following topics in detail:

  • About the Module
  • Install a System
  • Install the Removable Terminal Block
  • Install the Module
  • Install the End Cap
  • Wire the RTB
  • Power the System
  • Remove the Module
  • Specifications
  • Additional Resources

In-Stock Products Covered by This Document

Every product below is in stock at our Charlotte, NC warehouse and covered by this publication. Ships same-day (orders before 4 PM ET) with 2.5-year warranty included.

5069-IY4
5069-IY4
Allen-Bradley 5069-IY4 CompactLogix 5069 I/O Module 5069-IY4 Compact…
$392.00

Frequently Asked Questions

What input types do the 5069-IY4 and 5069-IY4K modules support?
The modules support differential and single-ended non-isolated current and voltage inputs, as well as thermocouple and RTD inputs. They can operate in multiple input ranges based on the input type connected.
Which controllers can use these modules?
The modules can be used as local I/O in CompactLogix 5380, Compact GuardLogix 5380, and CompactLogix 5480 controller systems. They can also be used as remote I/O with those same controllers and some other Logix 5000 controllers.
What RTBs are required, and do they ship with the module?
The module requires a 5069-RTB18-SPRING or 5069-RTB18-SCREW RTB for current, voltage, and RTD connections. When using thermocouple mode, a 5069-RTB14CJC-SPRING or 5069-RTB14CJC-SCREW RTB must be used. RTBs do not ship with Compact 5000 I/O modules and must be ordered separately.
Does the module support removal and insertion under power (RIUP)?
No. The module does not support RIUP. The RTB also does not support RIUP. Power must be removed before connecting or disconnecting the module or the RTB to prevent electric arc, which could cause an explosion in hazardous location installations.
What type of SA power do the 5069-IY4 and 5069-IY4K modules require?
The modules use DC SA power. DC power must be connected to the controller, adapter, or field potential distributor that provides SA power to the modules. If a system includes modules that use AC SA power and DC SA power, they must be installed on separate SA power buses.
What are the hazardous location approvals for this module?
The module is approved for North American Class I, Division 2, Groups A, B, C, D hazardous locations. It also carries UKEX and ATEX approval for Zone 2 (Ex ec IIC T4 Gc) per UKEX Regulation 2016 No. 1107 and ATEX Directive 2014/34/EU, and IECEx certification (IECExUL15.0055X) for Zone 2 per IEC 60079-0 and IEC 60079-7. The temperature code is T4 for all approvals.
What DIN rail is specified for mounting Compact 5000 I/O modules?
Use an EN50022 35 x 7.5 mm (1.38 x 0.30 in.) DIN rail. Zinc-plated chromate-passivated steel DIN rail is required to assure proper grounding. The DIN rail must be secured to the mounting surface approximately every 200 mm (7.8 in.) and must be properly grounded.

Disclaimer

Disclaimer: PLC Exchange is an independent reseller and is not an authorized distributor, affiliate, licensee, partner, or agent of Allen-Bradley / Rockwell Automation. All product information on this page is compiled from publicly-available manufacturer publications, technical data sheets, and catalog sources, each of which remains the copyright of its originating manufacturer. We make no representation or warranty, express or implied, regarding the accuracy, completeness, timeliness, or fitness for any particular purpose of the specifications or descriptions shown — content may contain errors, omissions, or out-of-date information. Product images are the property of their respective manufacturers, trademark owners, and source publications, and are displayed solely for identification purposes under the nominative fair use doctrine; images are representative and may depict a different configuration or catalog variant than the exact product listed. Purchasers should independently verify specifications against the current manufacturer publication before placing an order. All product names, trademarks, service marks, and registered trademarks are the property of their respective owners, and their use does not imply endorsement or affiliation.