Installation Instructions · Publication 5069-IN009 · Rockwell Automation

5069-OX4I Relay Output Module Installation Instructions

This document is installation instructions for the Compact 5000 5069-OX4I digital 4-point isolated normally-open/normally-closed relay output module. It covers DIN rail mounting, RTB installation and wiring, end cap installation, system power considerations, and module removal. The module is used as local or remote I/O with CompactLogix 5380, Compact GuardLogix 5380, and CompactLogix 5480 controller systems.

Download PDF
4 Output Points
2 A per channel Max Relay Current
0…60 Operating Temperature
300 V continuous, Basi… Isolation Voltage

Document Preview

Open the full PDF in a new tab  · Publication 5069-IN009

Specifications

Relay Ratings

DC resistive 2 A per channel @ 5…30V DC
AC resistive 2 A per channel @ 5…264V AC, 50/60 Hz
AC general use 2 A per channel @ 5…250V AC, 50/60 Hz
UKEX/ATEX/IECEx 2 A @ 5…125V AC
Module maximum 8 A per module

Power Consumption

MOD power 75 mA @ 18…32V DC
MOD power passthrough max 9.55 A @ 18…32V DC
SA power passthrough max 9.95 A @ 0…32V DC

Wiring — 5069-RTB18-SCREW

Wire size 0.5…1.5 mm² (22…16 AWG) solid or stranded shielded copper, rated 105 °C (221 °F) or greater; 3.5 mm (0.14 in.) max diameter including insulation
Load connections minimum 18 AWG, 90 °C (194 °F) rated wire
Insulation-stripping length 12 mm (0.47 in.)
Terminal torque 0.4 N•m (3.5 lb•in)

Wiring — 5069-RTB18-SPRING

Wire size 0.5…1.5 mm² (22…16 AWG) solid or stranded shielded copper, rated 105 °C (221 °F) or greater; 2.9 mm (0.11 in.) max diameter including insulation
Load connections minimum 18 AWG, 90 °C (194 °F) rated wire
Insulation-stripping length 10 mm (0.39 in.)

Pilot Duty Rating

AC pilot duty 5…240V AC, 50/60 Hz, C300 per channel
DC pilot duty 5…125V DC, R150 per channel

Temperature Ratings

Operating temperature 0…60 °C (32…140 °F)
Surrounding air temperature, max 60 °C (140 °F)
North American temp code T4
UKEX/ATEX temp code T4
IECEx temp code T4

Enclosure and Environment

Enclosure type rating None (open-style)
Pollution degree Degree 2 industrial environment
Overvoltage category Category II (EN/IEC 60664-1)
Altitude Up to 2000 m (6562 ft) without derating

Physical

DIN rail type EN50022 — 35 x 7.5 mm (1.38 x 0.30 in.)
Module width 25.56 mm (1.01 in.)
Module height 144.57 mm (5.69 in.)
Module depth (with RTB) 109.09 mm (4.29 in.)
Cable tie max width 4.5 mm (0.18 in.)

Communication Protocols

Supported industrial networks and field buses for the products covered by this publication.

Producer/Consumer Compact 5000 I/O modules use the Producer/Consumer communication model. Each module produces data without first being polled.

Certifications & Compliance

Class I, Division 2, Groups A, B, C, D (North American Hazardous Location) UKEX — Equipment Group II, Category 3G; Ex ec nC IIC T4 Gc; certificate UL22UKEX2379X ATEX — Equipment Group II, Category 3G; Ex ec nC IIC T4 Gc; certificate DEMKO15ATEX 1484X IECEx — Ex ec nC IIC T4 Gc; certificate IECExUL15.0055X Zone 2 (UKEX, ATEX, IECEx) — applicable at or below 125V AC or 30V DC

Document Contents

Full PDF covers the following topics in detail:

  • About the Module
  • Install a System
  • Install the RTB
  • Install the Module
  • Install the End Cap
  • Wire the RTB
  • Power the System
  • Remove the Module
  • Specifications
  • Additional Resources

Frequently Asked Questions

Which controllers can the 5069-OX4I be used with?
The 5069-OX4I can be used as a local I/O module in CompactLogix 5380, Compact GuardLogix 5380, and CompactLogix 5480 controller systems. It can also be used as a remote I/O module with those same controllers and some other Logix 5000 controllers.
Which removable terminal blocks (RTBs) are compatible with the 5069-OX4I?
The module is compatible with the 5069-RTB18-SPRING and 5069-RTB18-SCREW RTBs. RTBs do not ship with Compact 5000 I/O modules and must be ordered separately.
Does the 5069-OX4I support removal and insertion under power (RIUP)?
No. The module does not support RIUP capability. Power must be removed before inserting or removing the module or connecting and disconnecting the RTB.
Does the 5069-OX4I draw current from the SA power bus?
No. The 5069-OX4I module does not use SA power and does not draw current from the SA power bus. It passes SA power through to the next Compact 5000 I/O module in the system.
What is the maximum relay current rating for the 5069-OX4I?
The module is rated at 2 A per channel and 8 A per module. Specific per-channel ratings include 2 A resistive at 5…30V DC, 2 A resistive at 5…264V AC (50/60 Hz), 2 A general use at 5…250V AC (50/60 Hz), and 2 A at 5…125V AC for UKEX/ATEX/IECEx applications.
What DIN rail type is required for mounting the 5069-OX4I?
Use EN50022 35 x 7.5 mm (1.38 x 0.30 in.) DIN rail. Zinc-plated chromate-passivated steel DIN rail is required to assure proper grounding. The DIN rail should be secured to the mounting surface approximately every 200 mm (7.8 in.).
What are the hazardous location approvals for the 5069-OX4I?
The module holds North American Class I, Division 2, Groups A, B, C, D approval. It also carries UKEX (certificate UL22UKEX2379X) and ATEX (certificate DEMKO15ATEX 1484X) approvals for Zone 2 environments, as well as IECEx certification (certificate IECExUL15.0055X) for Zone 2, all with a temperature code of T4. Hazardous location ratings apply at or below 125V AC or 30V DC.

Disclaimer

Disclaimer: PLC Exchange is an independent reseller and is not an authorized distributor, affiliate, licensee, partner, or agent of Allen-Bradley / Rockwell Automation. All product information on this page is compiled from publicly-available manufacturer publications, technical data sheets, and catalog sources, each of which remains the copyright of its originating manufacturer. We make no representation or warranty, express or implied, regarding the accuracy, completeness, timeliness, or fitness for any particular purpose of the specifications or descriptions shown — content may contain errors, omissions, or out-of-date information. Product images are the property of their respective manufacturers, trademark owners, and source publications, and are displayed solely for identification purposes under the nominative fair use doctrine; images are representative and may depict a different configuration or catalog variant than the exact product listed. Purchasers should independently verify specifications against the current manufacturer publication before placing an order. All product names, trademarks, service marks, and registered trademarks are the property of their respective owners, and their use does not imply endorsement or affiliation.