User Manual · Publication 2711P-UM008 · Rockwell Automation
PanelView Plus 7 Performance Terminals User Manual
This user manual covers the installation, configuration, operation, and troubleshooting of Allen-Bradley PanelView Plus 7 Performance terminals, catalog numbers 2711P-xxx22x9P and related variants. It describes hardware features, panel mounting procedures, DC and AC power wiring, EtherNet/IP network topologies, and terminal settings for both Series A (Windows CE 6.0) and Series B (Windows 10 IoT Core) terminals. The manual also covers firmware updates, component replacement, and OS-level features including VNC, FTP, and web server configuration. It applies to touch-only and keypad models in 6.5-in. through 19-in. display sizes, including stainless-steel and conformal-coated variants.
Download PDFDocument Preview
Open the full PDF in a new tab · Publication 2711P-UM008
Specifications
Power Specifications
| DC input voltage | 18…30V DC (isolated), 24V DC nominal |
|---|---|
| DC power consumption | 50 W maximum (2.1 A at 24V DC) |
| AC input voltage | 100…240V AC, 50…60 Hz (Series A aluminum terminals only) |
| AC power consumption | 105 VA maximum |
| Power terminal wire size (single) | 0.3…2.1 mm² (22…14 AWG) |
| Power terminal wire size (dual) | 0.3…1.3 mm² (22…16 AWG) |
| Wire torque | 0.4…0.5 N•m (3.5…4.4 lb•in) |
| Terminal block mounting torque | 0.15…0.2 N•m (1.3…1.8 lb•in) |
Memory
| Series A RAM (and Stainless Steel Series A and B) | 512 MB |
|---|---|
| Series A user storage | 80 MB |
| Series B RAM (and Stainless Steel Series C) | 4 GB |
| Series B user storage | 2 GB |
USB Host Port Circuit Parameters (Hazardous Locations)
| Open circuit voltage (Voc) | 5.25V DC |
|---|---|
| Maximum output current (Ioc) | 1.25 A |
| Maximum capacitance (Ca) | 10 µF |
| Maximum inductance (La) | 15 µH |
Mounting Clearances
| Top clearance | 51 mm (2 in.) |
|---|---|
| Bottom clearance | 102 mm (4 in.) |
| Side without SD card | 25 mm (1 in.) |
| Side with SD card | 102 mm (4 in.) |
| Back clearance | 0 mm (0 in.) |
Panel Cutout Dimensions
| 6.5-in. touch only | 142 x 184 mm (5.59 x 7.24 in.) |
|---|---|
| 6.5-in. keypad and touch | 142 x 237 mm (5.59 x 9.33 in.) |
| 9-in. touch | 162 x 252 mm (6.38 x 9.92 in.) |
| 10.4-in. touch only | 224 x 269 mm (8.82 x 10.59 in.) |
| 10.4-in. keypad and touch | 224 x 335 mm (8.82 x 13.19 in.) |
| 12.1-in. touch | 218 x 312 mm (8.58 x 12.28 in.) |
| 15-in. touch only | 290 x 353 mm (11.42 x 13.90 in.) |
| 15-in. keypad and touch | 290 x 418 mm (11.42 x 16.46 in.) |
| 19-in. touch | 383 x 457 mm (15.08 x 17.99 in.) |
Ambient Temperature
| Standard operating range | 0…55 °C (32…131 °F) |
|---|---|
| 19-in. Series A (and Stainless Steel Series A and B) | 0…50 °C (32…122 °F) |
| Hazardous location temperature code | T4 at 55 °C (131 °F) maximum ambient |
Ethernet Ports
| Port type | Two 10/100Base-T, Auto MDI/MDIX |
|---|---|
| Supported topologies | Device Level Ring (DLR), linear, star |
Operating System by Series
| Series A (and Stainless Steel Series A and B) | Windows CE 6.0 |
|---|---|
| Series B (and Stainless Steel Series C) | Windows 10 IoT Core |
Catalog Number Format
How to read an Allen-Bradley 2711P catalog number. Each position encodes a specific configuration attribute.
Communication Protocols
Supported industrial networks and field buses for the products covered by this publication.
Certifications & Compliance
Document Contents
Full PDF covers the following topics in detail:
- Preface
- Chapter 1: Overview
- Chapter 2: Install the PanelView Plus 7 Performance Terminal
- Chapter 3: Configure Terminal Settings
- Chapter 4: Series A Terminals with Windows CE OS
- Chapter 5: Series B Terminals with Windows 10 IoT Core OS
- Chapter 6: Install and Replace Components
- Chapter 7: Update Firmware
- Chapter 8: Troubleshooting
- Appendix A: Fonts Resident on Terminal
- Appendix B: Languages Supported
In-Stock Products Covered by This Document
Every product below is in stock at our Charlotte, NC warehouse and covered by this publication. Ships same-day (orders before 4 PM ET) with 2.5-year warranty included.
Frequently Asked Questions
What operating systems do PanelView Plus 7 Performance terminals run?
What network topologies does the PanelView Plus 7 Performance terminal support?
What are the DC power requirements for the PanelView Plus 7 Performance terminal?
Which terminal models support AC power?
What is the operating ambient temperature range for these terminals?
What software is required to create HMI applications for these terminals?
What USB host port circuit parameters apply for use in hazardous locations?
Disclaimer
Disclaimer: PLC Exchange is an independent reseller and is not an authorized distributor, affiliate, licensee, partner, or agent of Allen-Bradley / Rockwell Automation. All product information on this page is compiled from publicly-available manufacturer publications, technical data sheets, and catalog sources, each of which remains the copyright of its originating manufacturer. We make no representation or warranty, express or implied, regarding the accuracy, completeness, timeliness, or fitness for any particular purpose of the specifications or descriptions shown — content may contain errors, omissions, or out-of-date information. Product images are the property of their respective manufacturers, trademark owners, and source publications, and are displayed solely for identification purposes under the nominative fair use doctrine; images are representative and may depict a different configuration or catalog variant than the exact product listed. Purchasers should independently verify specifications against the current manufacturer publication before placing an order. All product names, trademarks, service marks, and registered trademarks are the property of their respective owners, and their use does not imply endorsement or affiliation.