User Manual · Publication 2711P-UM007 · Rockwell Automation
PanelView Plus 7 Standard Terminals User Manual
This user manual covers the installation, configuration, operation, and troubleshooting of PanelView Plus 7 Standard terminals, catalog numbers 2711P-TxxxxD8S and 2711P-TxxxxD8S-B. It describes hardware features, EtherNet/IP network topologies, terminal settings, and firmware updates for display sizes ranging from 4.3-in. to 15.0-in. The terminals run FactoryTalk View ME Station on a Windows CE operating system and communicate with ControlLogix 5570 and CompactLogix 5370 controllers. Intended users include installation technicians, system integrators, and operators who configure and maintain HMI terminals.
Download PDFDocument Preview
Open the full PDF in a new tab · Publication 2711P-UM007
Specifications
Display and Input Options
| 4.3-in. (WQVGA) | 480 x 272 pixels, 16:9, TFT color touch |
|---|---|
| 5.7-in. (VGA) | 640 x 480 pixels, 4:3, TFT color touch |
| 6.5-in. (VGA) | 640 x 480 pixels, 4:3, TFT color touch |
| 9.0-in. (WVGA) | 800 x 480 pixels, 5:3, TFT color touch |
| 10.4-in. (SVGA) | 800 x 600 pixels, 4:3, TFT color touch |
| 12.1-in. (WXGA) | 1280 x 800 pixels, 16:10, TFT color touch |
| 15.0-in. (XGA) | 1024 x 768 pixels, 4:3, TFT color touch |
Power
| Nominal Input Voltage | 24V DC (18…30V DC), nonisolated |
|---|---|
| Max Power Consumption | 35 W (1.46 A at 24V DC) |
| Power Supply Type | SELV or PELV 24V DC |
| Terminal Block Wire Size | 0.3…2.1 mm² (22…14 AWG), single wire |
| Terminal Block Screw Torque | 0.56 N•m (5.0 lb•in) |
| Strip Length | 7 mm (0.28 in.) |
Memory
| RAM | 512 MB |
|---|---|
| Nonvolatile Memory | 512 MB (approx. 80 MB free user memory) |
Ethernet Ports
| Single-port models | One 10/100Base-T, Auto MDI/MDI-X, IEEE 1588 support |
|---|---|
| Dual-port (DLR) models | Two 10/100Base-T, Auto MDI/MDI-X, supports DLR topology |
| Max Cable Length | 100 m (328 ft) between port and 10/100Base-T hub |
| Supported Cable Types | CAT5, CAT5E, or CAT6 twisted-pair with RJ45 |
Environmental
| Ambient Temperature (Operating) | 0…55 °C (32…131 °F) |
|---|---|
| Pollution Degree | 2 (per IEC 60664-1) |
| Altitude | Up to 2000 m (6561 ft) without derating |
| Overvoltage Category | II (per IEC 60664-1) |
| Temperature Code | T4 at 55 °C max ambient |
Mounting
| Panel Thickness Range | 1.5…4.8 mm (0.060…0.188 in.) |
|---|---|
| Min Enclosure Protection | IP20 or greater |
| Clearance, Top/Bottom | 51 mm (2 in.) |
| Clearance, Side (no SD card) | 25 mm (1 in.) |
| Clearance, Side (SD card) | 51 mm (2 in.) |
| Clearance, Back | 0 mm (0 in.) |
Panel Cutout Dimensions
| 4.3-in. | 92 x 117 mm (3.62 x 4.61 in.) |
|---|---|
| 5.7-in. | 123 x 156 mm (4.84 x 6.14 in.) |
| 6.5-in. | 142 x 184 mm (5.59 x 7.24 in.) |
| 9.0-in. | 162 x 252 mm (6.38 x 9.92 in.) |
| 10.4-in. | 224 x 269 mm (8.82 x 10.59 in.) |
| 12.1-in. | 218 x 312 mm (8.58 x 12.28 in.) |
| 15.0-in. | 290 x 353 mm (11.42 x 13.90 in.) |
Firmware and Software Versions
| Firmware (Series C hardware) | 8.x or later |
|---|---|
| Firmware (Series D hardware) | 13.x or later |
| FactoryTalk View ME Station | 8.0 or later |
| FactoryTalk View Studio for Machine Edition | 8.0 or later |
| FactoryTalk ViewPoint | 2.6 or later |
Catalog Number Format
How to read an Allen-Bradley 2711P catalog number. Each position encodes a specific configuration attribute.
Communication Protocols
Supported industrial networks and field buses for the products covered by this publication.
Certifications & Compliance
Document Contents
Full PDF covers the following topics in detail:
- Preface
- Chapter 1: Overview
- Chapter 2: Install the PanelView Plus 7 Standard Terminal
- Chapter 3: Configure Terminal Settings
- Chapter 4: Windows Operating System
- Chapter 5: Install and Replace Components
- Chapter 6: Update Firmware
- Chapter 7: Troubleshooting
- Appendix A: Fonts Resident on Terminal
In-Stock Products Covered by This Document
Every product below is in stock at our Charlotte, NC warehouse and covered by this publication. Ships same-day (orders before 4 PM ET) with 2.5-year warranty included.
Frequently Asked Questions
Which controllers can the PanelView Plus 7 Standard terminal communicate with?
What are the application limits on a PanelView Plus 7 Standard terminal?
What network topologies does the terminal support?
What are the power requirements for the terminal?
How is the terminal mounted in a panel, and what panel thickness is supported?
How do I upgrade the terminal firmware?
What certifications apply to hazardous location use?
Disclaimer
Disclaimer: PLC Exchange is an independent reseller and is not an authorized distributor, affiliate, licensee, partner, or agent of Allen-Bradley / Rockwell Automation. All product information on this page is compiled from publicly-available manufacturer publications, technical data sheets, and catalog sources, each of which remains the copyright of its originating manufacturer. We make no representation or warranty, express or implied, regarding the accuracy, completeness, timeliness, or fitness for any particular purpose of the specifications or descriptions shown — content may contain errors, omissions, or out-of-date information. Product images are the property of their respective manufacturers, trademark owners, and source publications, and are displayed solely for identification purposes under the nominative fair use doctrine; images are representative and may depict a different configuration or catalog variant than the exact product listed. Purchasers should independently verify specifications against the current manufacturer publication before placing an order. All product names, trademarks, service marks, and registered trademarks are the property of their respective owners, and their use does not imply endorsement or affiliation.