Allen-Bradley 800F-X10 800F PB,22 mm Contact Block,Standard,Screw Contact Block,1 N
$19.99
Out of stock
Request QuoteAllen-Bradley 800F-X10 — The 800F-X10 is not found in this PDF; the document covers the Allen-Bradley Bulletin 800E/F DeviceNet™ Pendant Station (1 input / 1 output, 11…25V DC, 50 mA RMS / 100 mA peak @ 24V DC) for DeviceNet network communication with auto baud rate detection.
| Product Type | DeviceNet Pendant Station |
| I/O Configuration | 1 input / 1 output |
| Supply Voltage | 11…25V DC with reverse polarity protection |
| Current Consumption | 50 mA RMS, 100 mA peak @ 24V DC |
| Operating Temperature | -13° F…+131° F (-25°C…+55°C) |
| Enclosure Rating | NEMA Type 4/4X/13, IP66 |
PLC Exchange is not an authorized distributor: Original Packaging is synonymous with Used Surplus. See Original Packaging or Warranty for more information.
Description
Allen-Bradley 800F-X10
The 800F-X10 is not found in this PDF; the document covers the Allen-Bradley Bulletin 800E/F DeviceNet™ Pendant Station (1 input / 1 output, 11…25V DC, 50 mA RMS / 100 mA peak @ 24V DC) for DeviceNet network communication with auto baud rate detection.
| Product Overview | |
|---|---|
| Product Family | Bulletin 800E/F DeviceNet Pendant Station |
| Catalog Numbers | 800E-1xxxxxx or 800F-1xxxxxx (legend carrier) |
| Connector Type | Mini connector (5-pin sealed) |
| Power Source | DeviceNet network (no separate power supply required) |
| Mounting | Integral hanging bracket with 6 mm diameter eyelet |
| Electrical Specifications | |
|---|---|
| Supply Voltage Range | 11…25V DC with reverse polarity protection (Class 2 Power Source required) |
| Current Consumption | 50 mA RMS, 100 mA peak @ 24V DC |
| I/O Voltage | 24V DC |
| I/O Configuration | 1 input and 1 output (most 800E/F operators supported) |
| Environmental & Mechanical Ratings | |
|---|---|
| Operating Temperature | -13° F…+131° F (-25°C…+55°C) |
| Storage Temperature | -40° F…158° F (-40°C…+70°C) (185° F / 85°C max. for 24 hours) |
| Relative Humidity (Non-Condensing) | 0…95% Humidity |
| Enclosure Type | NEMA Type 4/4X/13, IP66 |
| Material (Enclosure) | PBT/PC Blend Thermoplastic, Relative Thermal Index 248° F (120°C), Flammability 94-5VA |
| Mechanical Shock | 1/2 cycle sine wave, 11 ms duration, 3 times in each axis, 100 G operational |
| Mechanical Vibration | 10…2000 Hz, 2 hours each axis, 10 G operational |
| Communications & DeviceNet | |
|---|---|
| Network Protocol | DeviceNet (CAN-based) |
| Data Rates | 125 KB, 250 KB, and 500 KB |
| Data Rate Cable Lengths | 125 KB: 500 m (1600 ft); 250 KB: 200 m (600 ft); 500 KB: 100 m (300 ft) |
| Auto Baud Detection | Enabled (Autobaud) |
| Messaging Type | Change-of-State (COS) and Strobe messaging supported |
| Compatible Scanner Modules | 1747-SDN, 1756-DNB, 1771-SDN (DeviceNet Masters) |
| Connector Pin Configuration | |
|---|---|
| Pin 1 | SHIELD (Uninsulated) |
| Pin 2 | VDC+ (Power Supply, Red) |
| Pin 3 | COM (Common, Black) |
| Pin 4 | CAN_H (Signal High, White) |
| Pin 5 | CAN_L (Signal Low, Blue) |
| Operational Features | |
|---|---|
| On-Delay Timebase (Parameter 4) | 0 = 1 ms (default); 1 = 10 ms |
| On-Delay Preset (Parameter 5) | User configurable 2 – 65,535 (default: 2) |
| Off-Delay/One-Shot Type (Parameter 6) | 0 = Disabled (default); 1 = One-Shot; 3 = Off-Delay |
| Off-Delay/One-Shot Timebase (Parameter 7) | 0 = 1 ms (default); 1 = 10 ms |
| Off-Delay/One-Shot Preset (Parameter 8) | User configurable 0…65,535 (default: 0) |
| Output Fault Action (Parameter 11) | 0 = Fault Value (default); 1 = Hold Last State |
| Output Fault Value (Parameter 12) | 0 = Fault Output Off (default); 1 = Fault Output On |
| Output Idle Action (Parameter 13) | 0 = Idle Value (default); 1 = Hold Last State |
| Output Idle Value (Parameter 14) | 0 = Idle Output Off (default); 1 = Idle Output On |
| Certifications & Compliance | |
|---|---|
| Safety & EMC Certifications | UL, CUL, CE marked for all applicable directives |
| CE Directives | EN55011, EN50081-2, EN50082-2, EN60947-5-1 |
| Intended Use Environment | Industrial |
PLC Exchange Original Packaging is synonymous with Used Surplus. Because we are not an authorized distributor, we are not legally allowed to claim these items as “New”, “Factory Sealed”, or any other term that may imply such. We have over 10 years of experience working with trusted suppliers to make sure you receive the top-quality hardware you need. Used Surplus items ship in their original packaging, with the same function and contents as OEM-supplied materials. PLC Exchange is an independent supplier of industrial automation products and is not affiliated with the brand manufacturer or any of its authorized distributors. All warranties are provided directly by PLC Exchange. Trademarks, logos, and brand names referenced are property of their respective owners and are used for descriptive identification only.
Disclaimer: PLC Exchange is an independent reseller and is not an authorized distributor, affiliate, licensee, partner, or agent of Allen-Bradley / Rockwell Automation. All product information on this page is compiled from publicly-available manufacturer publications, technical data sheets, and catalog sources, each of which remains the copyright of its originating manufacturer. We make no representation or warranty, express or implied, regarding the accuracy, completeness, timeliness, or fitness for any particular purpose of the specifications or descriptions shown — content may contain errors, omissions, or out-of-date information. Product images are the property of their respective manufacturers, trademark owners, and source publications, and are displayed solely for identification purposes under the nominative fair use doctrine; images are representative and may depict a different configuration or catalog variant than the exact product listed. Purchasers should independently verify specifications against the current manufacturer publication before placing an order. All product names, trademarks, service marks, and registered trademarks are the property of their respective owners, and their use does not imply endorsement or affiliation.
Technical Notes for 800F-X10
- Refer to the manufacturer's installation instructions for proper mounting, wiring, and configuration.
- Ensure compatibility with your existing system architecture before ordering.
- All 800F-X10 units sold by PLC Exchange are tested and ship in original factory packaging.
- For application-specific questions or system compatibility verification, contact PLC Exchange technical support at [email protected] or 980-202-0882.
Alternative Part Numbers & Names for 800F-X10
The 800F-X10 by Allen-Bradley may also be found under the following alternative names, catalog numbers, or common search variations:
- 800FX10
- Allen Bradley 800F-X10
- Allen-Bradley 800F-X10
- 800F X10
- 800F/X10
All variations refer to the same Allen-Bradley product. If you are unsure whether this is the correct part for your application, contact our team for assistance.
Additional information
| Weight | 0.5 lbs |
|---|---|
| Dimensions | 12 × 10 × 6 in |
| warranty | 2.5 Year PLC Exchange Warranty, 30 Days worry-free return from delivery |
| upc | 662468118897 |
| mpn | 800F-X10 |
| manufacturer | Allen-Bradley |
| condition | Original Packaging |
Dimensions & Weight for 800F-X10
| Shipping Dimensions | |
|---|---|
| Weight | 0.5 lbs |
| Length | 12 in |
| Width | 10 in |
| Height | 6 in |
| Box Dimensions (L×W×H) | 12 × 10 × 6 in |
Dimensions shown are for the shipping package. For module-level mechanical dimensions, refer to the manufacturer datasheet.
Only logged in customers who have purchased this product may leave a review.
Frequently Asked Questions
Where can I find the technical datasheet for the 800F-X10?
The official manufacturer datasheet is available for download on the 800F-X10 product page at PLC Exchange. Look for the Tech Data PDF link in the product description.
Does the 800F-X10 include a warranty?
Yes. Every 800F-X10 sold by PLC Exchange includes a 2.5-year warranty (30 months, full replacement). Details: https://plcexchange.net/warranty-information/
What is the return policy for the 800F-X10?
PLC Exchange offers a 30-day worry-free return policy. Eligibility and details: https://plcexchange.net/return-policy/
When will my 800F-X10 ship?
In-stock orders placed before 4 PM ET ship the same business day via free UPS Ground. Expedited options (Next Day Air, 2nd Day Air) are available at checkout.
Who manufactures the 800F-X10?
The 800F-X10 is manufactured by Allen-Bradley. PLC Exchange is an independent reseller specializing in Allen-Bradley industrial automation products.
Related products
-
Out of Stock
800F-X10VAllen-Bradley 800F-X10V 800F PB,22mm Contact Block,Screw Contact Block,Low Voltage,1
$69.99 -
Out of Stock
800F-X01L
Allen-Bradley 800F-X01L 800F PB,22mm Contact Block,Screw Contact Block,NCC Late Brea
$39.99 -
Out of Stock
800F-X01B
Allen-Bradley 800F-X01B 800F PB,22mm Contact Block,Screw Contact Block,NCC Early Bre
$54.99 -
Out of Stock
800F-X10MAllen-Bradley 800F-X10M Contact Block,Normally Open Early Early Make,1 N.O.E.E.M., S
$49.99
Reviews
There are no reviews yet.