Allen-Bradley 1783-ETAP1F Embedded Switch Technology 3 PORT EtherNet/IP TAP 2 Coppe
$604.99
Out of stock
Request QuoteAllen-Bradley 1783-ETAP1F — The 1783-ETAP1F is an Allen-Bradley EtherNet/IP Ethernet tap with 2 copper ports and 1 fiber port rated at 24V DC (20.4…27.6V DC), consuming 4.8 W maximum, with 100BASE-FX singlemode fiber connectivity up to 10 km.
| Description | EtherNet/IP tap with 2 copper ports and 1 fiber port |
| Power Input | 24V DC (20.4…27.6V DC) CL 2/SELV |
| Power Consumption | 4.8 W max |
| Current Consumption | 200 mA @ 24V DC |
| Fiber Type | 100BASE-FX singlemode fiber |
| Operating Temperature | -25…+60 °C (-13…+140 °F) |
Description
Allen-Bradley 1783-ETAP1F
The 1783-ETAP1F is an Allen-Bradley EtherNet/IP Ethernet tap with 2 copper ports and 1 fiber port rated at 24V DC (20.4…27.6V DC), consuming 4.8 W maximum, with 100BASE-FX singlemode fiber connectivity up to 10 km.
| Product Overview | |
|---|---|
| Catalog Number | 1783-ETAP1F |
| Product Type | EtherNet/IP Ethernet Tap |
| Copper Ports | 2 |
| Fiber Ports | 1 |
| Tap Type | Fiber, single-port |
| Electrical Specifications | |
|---|---|
| Power Input | 24V DC (20.4…27.6V DC) CL 2/SELV |
| Current Consumption, Max | 200 mA @ 24V DC |
| Power Consumption, Max | 4.8 W |
| Power Dissipation | 4.8 W |
| Isolation Voltage | 30V (continuous), basic insulation type, network channels to power and network channels to network channels; Type tested at 853V AC for 60 s |
| Fiber Connection Specifications | |
|---|---|
| Fiber Transceiver Type | 100Base-FX IEEE802.3u |
| Interface Connector | Dual LC |
| Optical Wavelength | 1310 nm |
| Core Size/Cladding Size | G.652 |
| Modal Bandwidth | — |
| Cable Length, Max | 10 km (32,808 ft) |
| Transmit Power | -8 (max)…-15 (min) |
| Receive Power | -8 (max)…-28 (min) |
| DOM Support | Yes |
| Environmental Specifications | |
|---|---|
| Temperature, Operating | -25…+60 °C (-13…+140 °F) |
| Temperature, Surrounding Air, Max | 60° C (140 °F) |
| Temperature, Nonoperating | -40…+85 °C (-40…+185 °F) |
| Relative Humidity | 5…95% noncondensing |
| Vibration (IEC 60068-2-6) | 5 g @ 10…500 Hz |
| Shock, Operating | 30 g |
| Shock, Nonoperating | 50 g |
| Wiring and Installation | |
|---|---|
| Wire Size, DC Power Connection | One 0.33…3.3 mm² (22…12 AWG) or two 0.33…1.3 mm² (22…16 AWG) solid or stranded copper wire rated at 75 °C (167 °F) or greater, 1.2 mm (3/64 in.) insulation max |
| Screw Torque, Power Terminal | 0.6…0.8 N•m (5…7 in•lb) |
| Wiring Category | 1 – on power ports; 2 – on communication ports |
| Enclosure Type Rating | None (open-style) |
| Immunity and Compliance | |
|---|---|
| Emissions (CISPR11) | Class A |
| ESD Immunity (IEC 61000-4-2) | 6 kV contact discharges; 8 kV air discharges |
| Radiated RF Immunity (IEC 61000-4-3) | 10V/m with 1 kHz sine-wave 80% AM from 80…2000 MHz; 10V/m with 200 Hz 50% Pulse 100% AM at 900 MHz; 10V/m with 200 Hz 50% Pulse 100% AM at 1890 MHz; 3V/m with 1 kHz sine-wave 80% AM from 2000…2700 MHz |
| EFT/B Immunity (IEC 61000-4-4) | ±4 kV at 5 kHz on power ports; ±3 kV at 5 kHz on communication ports |
| Surge Transient Immunity (IEC 61000-4-5) | ±1 kV line-line (DM) and ±2 kV line-earth (CM) on power ports; ±2 kV line-earth (CM) on communication ports |
| Conducted RF Immunity (IEC 61000-4-6) | 10V rms with 1 kHz sine-wave 80% AM from 150 kHz…80 MHz |
| Voltage Variation (IEC 61000-4-29) | 10 ms interruption on DC supply ports |
| Certifications | |
|---|---|
| c-UL-us | UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584. UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810. |
| CE | European Union 2004/108/EC EMC Directive, compliant with: EN 61326-1; Meas./Control/Lab., Industrial Requirements; EN 61000-6-2; Industrial Immunity; EN 61000-6-4; Industrial Emissions; EN 61131-2; Programmable Controllers (Clause 8, Zone A and B). European Union 2011/65/EU RoHS, compliant with: EN 50581; Technical Documentation |
| C-Tick | Australian Radiocommunications Act, compliant with: AS/NZS CISPR 11; Industrial Emissions |
| Ex | European Union 94/9/EC ATEX Directive, compliant with: EN 60079-15; Potentially Explosive Atmospheres, Protection “n”; EN 60079-0; General Requirements; II 3 G Ex nA IIC T4 X |
| KC | Korean Registration of Broadcasting and Communications Equipment, compliant with: Article 58-2 of Radio Waves Act, Clause 3 |
| EtherNet/IP | ODVA conformance tested to EtherNet/IP specifications |
| BSMI | CNS 13438 (95); CNS14336-1 (99) Taiwan |
Disclaimer: PLC Exchange is an independent reseller and is not an authorized distributor, affiliate, licensee, partner, or agent of Allen-Bradley / Rockwell Automation. All product information on this page is compiled from publicly-available manufacturer publications, technical data sheets, and catalog sources, each of which remains the copyright of its originating manufacturer. We make no representation or warranty, express or implied, regarding the accuracy, completeness, timeliness, or fitness for any particular purpose of the specifications or descriptions shown — content may contain errors, omissions, or out-of-date information. Product images are the property of their respective manufacturers, trademark owners, and source publications, and are displayed solely for identification purposes under the nominative fair use doctrine; images are representative and may depict a different configuration or catalog variant than the exact product listed. Purchasers should independently verify specifications against the current manufacturer publication before placing an order. All product names, trademarks, service marks, and registered trademarks are the property of their respective owners, and their use does not imply endorsement or affiliation.
Technical Notes for 1783-ETAP1F
- Refer to the manufacturer's installation instructions for proper mounting, wiring, and configuration.
- Ensure compatibility with your existing system architecture before ordering.
- All 1783-ETAP1F units sold by PLC Exchange are tested and ship in original factory packaging.
- For application-specific questions or system compatibility verification, contact PLC Exchange technical support at [email protected] or 980-202-0882.
Alternative Part Numbers & Names for 1783-ETAP1F
The 1783-ETAP1F by Allen-Bradley may also be found under the following alternative names, catalog numbers, or common search variations:
- 1783ETAP1F
- Allen Bradley 1783-ETAP1F
- Allen-Bradley 1783-ETAP1F
- 1783 ETAP1F
- 1783/ETAP1F
All variations refer to the same Allen-Bradley product. If you are unsure whether this is the correct part for your application, contact our team for assistance.
Additional information
| Weight | 0.5 lbs |
|---|---|
| Dimensions | 4.1 × 4.8 × 1.4 in |
| warranty | 2.5 Year PLC Exchange Warranty, 30 Days worry-free return from delivery |
| upc | 612598594443 |
| mpn | 1783-ETAP1F |
| manufacturer | Allen-Bradley |
| condition | Original Packaging |
Dimensions & Weight for 1783-ETAP1F
| Shipping Dimensions | |
|---|---|
| Weight | 0.5 lbs |
| Length | 4.1 in |
| Width | 4.8 in |
| Height | 1.4 in |
| Box Dimensions (L×W×H) | 4.1 × 4.8 × 1.4 in |
Dimensions shown are for the shipping package. For module-level mechanical dimensions, refer to the manufacturer datasheet.
Only logged in customers who have purchased this product may leave a review.
Frequently Asked Questions
Where can I find the technical datasheet for the 1783-ETAP1F?
The official manufacturer datasheet is available for download on the 1783-ETAP1F product page at PLC Exchange. Look for the Tech Data PDF link in the product description.
Does the 1783-ETAP1F include a warranty?
Yes. Every 1783-ETAP1F sold by PLC Exchange includes a 2.5-year warranty (30 months, full replacement). Details: https://plcexchange.net/warranty-information/
What is the return policy for the 1783-ETAP1F?
PLC Exchange offers a 30-day worry-free return policy. Eligibility and details: https://plcexchange.net/return-policy/
When will my 1783-ETAP1F ship?
In-stock orders placed before 4 PM ET ship the same business day via free UPS Ground. Expedited options (Next Day Air, 2nd Day Air) are available at checkout.
Who manufactures the 1783-ETAP1F?
The 1783-ETAP1F is manufactured by Allen-Bradley. PLC Exchange is an independent reseller specializing in Allen-Bradley industrial automation products.
Related products
-
Out of Stock
1783-MMX8TAAllen-Bradley 1783-MMX8TA Stratix 5800 expansion, 8-port GE copper with FPGA
$2,600.60 -
Out of Stock
1783-US16T2S/BAllen-Bradley 1783-US16T2S/B Stratix 2000 18-port switch 16 FE + 2 SFP
$1,964.99 -
Out of Stock
1783-RA2TGBAllen-Bradley 1783-RA2TGB Stratix 4300 Remote Access Router, VPN, 1 Ethernet 10/100/10
$1,964.99 -
Out of Stock
1783-US8T/BAllen-Bradley 1783-US8T/B Stratix 2000 8-port Fast Ethernet unmanaged switch
$1,964.99
Reviews
There are no reviews yet.